投稿者: sugi

Shu, L., Li, S., Fang, Z., Kizaki, T., Kimura, K., & Sugita, N. (2020). Study on dedicated drill bit design for carbon fiber reinforced polymer drilling with an improved cutting mechanism. Composite Part A: Applied Science and Manufacturing, 142, 106259. https://doi.org/10.1016/j.compositesa.2020.106259

Kizaki, T., Takahashi, K., Katsuma, T., Shu, L., & Sugita, N. (2020). Prospects of dry continuous generating grinding based on specific energy requirement. Journal of Manufacturing Processes, 61(June 2020), 190–207. https://doi.org/10.1016/j.jmapro.2020.09.075

Shu, L., Yao, J., Yamamoto, K., Sato, T., & Sugita, N. (2021). In vivo Kinematical Validated Knee Model for Preclinical Testing of Total Knee Replacement. Computers in Biology and Medicine.

Fang, Z., Nagato, K., Sugita, N., & Nakao, M. (2021). Grinding performance and delamination analysis of FeSiB metallic glass laminate. Journal of Advanced Mechanical Design, Systems, and Manufacturing.

Kim, S., Kim, Y., Shin, S. C., Hibino, K., & Sugita, N. (2021). Interferometric thickness measurement of glass plate by phase-shifting analysis using wavelength scanning with elimination of bias phase error. Optical Review, 28(1), 48–57. https://doi.org/10.1007/s10043-020-00634-4

Fang, Z., Nagato, K., Liu, S., Sugita, N., & Nakao, M. (2021). Investigation into surface integrity and magnetic property of FeSiB metallic glass in two-dimensional cutting. Journal of Manufacturing Processes.

Li, S., Shu, L., Kizaki, T., Bai, W., Terashima, M., & Sugita, N. (2021). Cortical bone drilling: a time series experimental analysis of thermal characteristics. Journal of Manufacturing Processes.

加藤慎, 河野大輔, 吉岡勇人, 杉田直彦, 浜口顕秀, et al., 2020, 新構造材料適用省エネ型工作機械の熱変位および省エネルギー性能評価, 日本機械学会論文集

Influence of tool eccentricity on surface roughness in gear skiving, Zongwei Ren, Zhenglong Fang, Go Kobayashi, Toru Kizaki, Naohiko Sugita, Tsukasa Nishikawa, Junshi Kugo, Eiji Nabata, Precision Engineering が精密工学会沼田記念論文賞を受賞しました．

Shu, L., Li, S., Fang, Z., Kizaki, T., Kimura, K., & Sugita, N. (2021). Study on dedicated drill bit design for carbon fiber reinforced polymer drilling with an improved cutting mechanism. Composite Part A: Applied Science and Manufacturing.