Home

Welcome to Manufacturing Laboratory, the University of Tokyo. Our research areas are Cutting and Grinding, Machine Tools, Medical Application, and Smart Factory.

お知らせ

Paper : JAMDSM

Nakamura, S., Ohara, K., Nakanishi, K., & Sugita, N. (2025). Chip breaking by triangular tool path in turning process. Journal of Advanced Mechanical Design, Systems and Manufacturing, 19(1). https://doi.org/10.1299/jamdsm.2025jamdsm0007

Paper : Materials & Design

Wang, C., Fang, Z., Kizaki, T., & Sugita, N. (2025). Towards understanding the machining effect on the additively manufactured stainless steel for various scanning directions: Texture evolution and mechanical properties. Materials & Design, 113776. https://doi.org/10.1016/j.matdes.2025.113776

Paper : JAMDSM

NAKAMURA, S., NAKANISHI, K., OHARA, K., NAKAMURA, Y., WANG, C., LIU, J., TANAKA, S., KIZAKI, T., & SUGITA, N. (2025). Improvement of surface roughness in simultaneous two turrets turning with low-frequency vibration. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 19(1), 2025jamdsm0006. https://doi.org/10.1299/jamdsm.2025jamdsm0006

ものづくりを究める
Pursue of Manufacturing

本研究室では,最先端の生産加工技術,工作機械技術およびレーザ加工技術を構築することと,それを医療などの種々の分野に適用することを目的として研究を行っています.具体的には(1)生産加工・工作機械(2)レーザ加工(3)医療応用(4)スマート工場 の4つの分野を対象としています .

We’re studying advanced processing, machine tools and laser processing for various fields. (1) manufacturing and machine tools, (2) laser processing, (3) medical applications, and (4) smart factories.