Paper : CIRP Annals

Ito, Y., Ren, G., & Sugita, N. (2025). Mechanism and dynamics of transient and selective laser processing revealed through high-speed observation combined with precision timing control. CIRP Annals. https://doi.org/10.1016/j.cirp.2025.03.034

Paper : Measurement

Liu, J., Kizaki, T., Liao, Y., Kambe, Y., & Sugita, N. (2025). Health monitoring for abnormal clogging problems in industrial pipeline systems with multiple vibration measurements. Measurement, 118372. https://doi.org/10.1016/j.measurement.2025.118372

Paper : Science Advances

Zhang, Y., Koike, T., Yoshizaki, R., Ren, G., Shibata, A., Kiriake, S., Hasegawa, R., Nagasawa, I., Nagato, K., Sugita, N., & Ito, Y. (2025). Ultrahigh-speed laser drilling of transparent materials via transient electronic excitation. In Sci. Adv (Vol. 11). https://www.science.org

Paper : CIRP Annals

Bai, T., Wang, C., Yu, G., Kolmanovskyi, M., Saelzer, J., Kizaki, T., Biermann, D., & Fang, Z. (2025). Towards understanding the surface strengthening mechanism in negative rake angle cutting of additively manufactured stainless steel. CIRP Annals. https://doi.org/10.1016/j.cirp.2025.04.071

Paper : Precision Engineering

Bae, J., Kim, Y., Ito, Y., Sugita, N., & Mitsuishi, M. (2025). Quality enhancement of interferometric fringe pattern based on deep-learning-based denoising of combined noise. Precision Engineering, 95, 75–88. https://doi.org/10.1016/j.precisioneng.2025.04.021

Paper : Optics Letters

Tokumi, K., Hattori, J., Sun, H., Ren, G., Sugita, N., & Ito, Y. (2025). Three-dimensional shear stress measurement of stress waves in silica glass induced by femtosecond laser. Optics Letters. https://doi.org/10.1364/OL.560453

Paper : JAMDSM

Nakamura, S., Ohara, K., Nakanishi, K., & Sugita, N. (2025). Chip breaking by triangular tool path in turning process. Journal of Advanced Mechanical Design, Systems and Manufacturing, 19(1). https://doi.org/10.1299/jamdsm.2025jamdsm0007

Paper : Materials & Design

Wang, C., Fang, Z., Kizaki, T., & Sugita, N. (2025). Towards understanding the machining effect on the additively manufactured stainless steel for various scanning directions: Texture evolution and mechanical properties. Materials & Design, 113776. https://doi.org/10.1016/j.matdes.2025.113776

Paper : JAMDSM

NAKAMURA, S., NAKANISHI, K., OHARA, K., NAKAMURA, Y., WANG, C., LIU, J., TANAKA, S., KIZAKI, T., & SUGITA, N. (2025). Improvement of surface roughness in simultaneous two turrets turning with low-frequency vibration. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 19(1), 2025jamdsm0006. https://doi.org/10.1299/jamdsm.2025jamdsm0006